If You Perform a Process Again Will It Occur the Same Way

Summary

A "clean boot" starts Windows with a minimal set of drivers and startup programs, so that you can determine whether a background program is interfering with your game or program.  This is similar to starting Windows in Safe Style, but provides you more control over which services and programs run at startup to aid you isolate the cause of a trouble.

How to perform a clean boot

These steps might look complicated at first glance, but post-obit them in order, step-by-step, will help you become yous dorsum on rails.

Use the following steps to perform a make clean boot in Windows ten.  Perform a clean kick for Windows 7, Windows viii and Windows viii.1

1. Sign in to the computer as an administrator.  If you lot don't accept an administrator account, you can create 1. Create a local user or administrator account in Windows 10 .

2. In the search box on the taskbar, type msconfig and select System Configuration from the results.

Important If the estimator is connected to a network, network policy settings might preclude you from following these steps. Just use the Organization Configuration utility to change the avant-garde kick options on the computer with guidance from a Microsoft support engineer.  Using the System Configuration utility might make the estimator unusable.

1. On the Services tab of System Configuration, select Hibernate all Microsoft services, and and then select Disable all.
   

2. On the Startup tab of System Configuration, select Open Task Manager.
   

3. Under Startup in Task Manager, for each startup particular, select the item and then select Disable.

   

4. Close Job Director.

5. On the Startup tab of System Configuration, select OK.  When yous restart the estimator, it's in a clean kick surround.  Follow troubleshooting steps to install, uninstall, or run your application.  Your computer might temporarily lose some functionality while in a clean kick environment.  Reset the estimator to start ordinarily subsequently clean kicking troubleshooting and resume functionality.

1. Swipe in from the correct edge of the screen, and and then select Search. Or, if you lot're using a mouse, betoken to the lower-correct corner of the screen, and and so select Search.

2. Type msconfig in the search box, and so select msconfig.
   

3. On the Services tab of Arrangement Configuration, select Hide all Microsoft services, and so select Disable all.

Important If the calculator is connected to a network, network policy settings might prevent you lot from following these steps. Only apply the System Configuration utility to change the advanced boot options on the reckoner with guidance from a Microsoft support engineer.  Using the System Configuration utility might make the computer unusable.

1. On the Startup tab of Organisation Configuration, select Open up Job Manager.

2. Select Startup in Chore Manager, and so for each startup detail, select the item and then select Disable.
   

3. Shut Task Manager.

4. On the Startup tab of System Configuration, select OK, and then restart the calculator.

The estimator restarts in a make clean boot environment.  Follow troubleshooting steps to install, uninstall, or run your application.  Your calculator might temporarily lose some functionality while in a clean kicking environment, still that functionality will return.  Finish troubleshooting and reset the computer to beginning usually.

1. Sign in to the calculator by using an account that has administrator rights.

2. Select Showtime, blazon msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
   Note If you're prompted for an administrator countersign or for confirmation, type the password or provide confirmation.
   

3. On the General tab, select Selective startup, and then deselect Load startup items. (The Use Original Boot.ini check box is unavailable.)
   Important If the calculator is connected to a network, network policy settings might prevent you from following these steps. Only employ the System Configuration utility to change the avant-garde boot options on the computer with guidance from a Microsoft support engineer.  Using the System Configuration utility might make the figurer unusable.

4. On the Services tab, select Hide all Microsoft services, and then select Disable all.
   
   Note This step lets Microsoft services continue to run. These services include Networking, Plug and Play, Upshot Logging, Error Reporting, and other services. If you disable these services, you might permanently delete all restore points. Do non do this if you lot desire to use the Organization Restore utility together with existing restore points.

5. Select OK, and then select Restart.  The reckoner restarts in a make clean kicking environment.  Follow troubleshooting steps to install, uninstall, or run your awarding.  Your computer might temporarily lose some functionality while in a make clean kicking surround, all the same that functionality will return.  Finish troubleshooting and reset the computer to first normally.

Install, uninstall, or run an application

Later on yous restart the computer, you'll take a clean boot surround. Then, do one of the following, as appropriate for your situation:

Note If you receive the "The Windows Installer service could not be accessed" error during the installation or uninstallation, you'll need more than information. How to commencement the Windows Installer service when system services are not loaded.  Then install or uninstall the program or update again.

If the installation or uninstallation is successful, yous outcome is resolved and you can start equally yous usually exercise.  How to reset the figurer to offset as usual

If the installation or uninstallation withal fails, that means this issue is not caused by application or service interference. You lot mght need to contact the program manufacturer for more than specific back up.

If the program runs correctly, this issue is caused by application or service interferences.  You can notice out which application or service is causing the issue.   How to determine what is causing the issue by performing a clean boot

If the program still doesn't run as expected, this consequence is non caused by application or service interference. You might need to contact the programme manufacturer for more specific support.

How to make up one's mind what is causing the problem later you exercise a clean boot

If your problem does not occur while the computer is in a make clean boot environment, then you can make up one's mind which startup application or service is causing the problem by systematically turning them on or off and restarting the computer.  While turning on a single service or startup item and rebooting each time will somewhen discover the problematic service or application, the nearly efficient way to practice this is to test half of them at a fourth dimension, thus eliminating half of the items as the potential cause with each reboot of the computer.  You can then repeat this process until you've isolated the problem.  Here'south how:

1. Sign in to the computer by using an account that has administrator rights. If you don't have an ambassador account, you can create one.Create a local user or administrator business relationship in Windows 10

2. For Windows 10, in the search box on the taskbar, blazon msconfig.  (In Windows 8 or eight.one, swipe in from the correct border of the screen, and then select Search. Or, if you lot're using a mouse, indicate to the lower-right corner of the screen, and then select Search.  In the search box, type msconfig.)

3. Select msconfig or Arrangement Configuration from the search results.

4. Select Services, and then select Hide all Microsoft services.

5. Select each of the check boxes in the upper half of the Service listing.

6. Select OK, and then select Restart.

7. Afterward the computer restarts, determine whether the problem still occurs.

   • If the trouble nonetheless occurs, one of the checked items is the problematic service.  Repeat steps 1 through six, but in Step five, clear the lower half of the boxes in the Service list that you lot selected in your concluding exam.

   • If the problem doesn't occur, the checked items are not the cause of the problem. Repeat steps i through 6, but in Step 5, plow on the upper half of the boxes that yous cleared in the Service list in the terminal examination.

   • Repeat these steps until you lot've either isolated the problem to a unmarried service, or until you've determined that none of the services are the cause of the problem.  If yous experience the problem when only one service is selected in the Service listing, go to pace 10. If none of the services cause the problem, go to step viii.

8. Select Startup, and then select the upper half of the check boxes in the Startup Item list.

9. Select OK, and and so select Restart.

   • If the problem withal occurs, repeat footstep eight, just this time clear the lower half of the boxes in the Startup Item list that you selected in your last examination.

   • If the problem does non occur, repeat step 8, and turn on the upper half of the boxes that you cleared in the Startup Item list in the concluding test.

   • If y'all still experience the problem later only one Startup Item is selected in the Startup Detail list, this ways that the selected Startup Detail causes the problem, and yous should go to step ten. If no Startup Item causes this problem, there might be a problem with a Microsoft service.  Repair the service, reset, or reinstall Windows

10. Afterwards you determine the startup item or the service that causes the problem, contact the programme manufacturer to determine whether the problem can exist resolved. Or, run Windows with the trouble item disabled.  To exercise this, run the System Configuration utility and enable your Services and Startup Items, just clear the check box for the trouble item.

1. Sign in to the computer by using an account that has administrator rights.

2. Select Commencement, type msconfig.exe in the Start Search box, and and so printing Enter to starting time the Arrangement Configuration utility.
   Note If you're prompted for an ambassador countersign or for confirmation, blazon the countersign or provide confirmation.
   

3. Select the Services tab, and and so select Hide all Microsoft services.

4. Select the upper one-half of the check boxes in the Service list.

5. Select OK, and and so select Restart.

6. Later the computer finishes restarting, determine whether the problem still occurs.

   • If the problem yet occurs, repeat steps i through v, just in Step four, articulate the lower one-half of the boxes in the Service list that you selected in your last test.

   • If the problem does not occur, the checked items are not the crusade of the trouble. Echo steps 1 through v, only in Pace four, plow on the upper one-half of the boxes that you cleared in the Service list in the concluding exam.

   • If you still feel the trouble later only one service is selected in the Service list, this means that the selected service causes the trouble. Go to step ix. If no service causes this problem, get to stride 7.

7. Select Startup, and then select the upper one-half of the check boxes in the Startup Item list.
   

8. Select OK, and then select Restart.

   • If the problem still occurs, echo footstep 7, but this time clear the lower one-half of the boxes in the Startup Detail list that you selected in your last exam.

   • If the problem does not occur, echo step 7, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the bank check boxes.

   • If you withal experience the problem after only ane Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the trouble. Get to Step 10. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To repair the service, Microsoft recommends that you reset or reinstall Windows.

9. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the trouble can be resolved. Or, run Windows with the problem item disabled.  (Run the System Configuration utility and enable your Services and Startup Items, only articulate the check box for the problem item.)

Reset the reckoner to offset normally after make clean kicking troubleshooting

Afterwards you terminate troubleshooting, follow these steps to reset the figurer to showtime ordinarily.

1. In Windows 10, in the search box on the taskbar, blazon msconfig. (In Windows eight or viii.ane, swipe in from the correct edge of the screen, and so select Search. Or, if you lot're using a mouse, signal to the lower-correct corner of the screen, and then select Search.  Type msconfig.)

2. Select msconfig or Organization Configuration from the search results.

3. On the General tab, select Normal Startup.

4. Select Services, articulate the bank check box beside Hibernate all Microsoft services, and so select Enable all.

5. Select Startup, so select Open Task Manager.

6. In Task Managing director, enable all of your startup programs, and then select OK.

7. When you're prompted to restart the computer, select Restart.

1. Click Offset, blazon msconfig.exe in the Start Search box, and and so printing Enter.
   Note If you're prompted for an administrator countersign or for confirmation, type the countersign or select Continue.

2. On the General tab, select Normal Startup, then select OK.

3. When you're prompted to restart the estimator, select Restart.

How to offset the Windows Installer service when system services are not loaded

If you lot run a Setup program without starting the Windows Installer service, you lot might receive the post-obit error message:

The Windows Installer service could not be accessed. Contact your support personnel to verify that the Windows Installer service is properly registered.

The Windows Installer service doesn't beginning if y'all clear the Load system services check box in the System Configuration utility. To utilise the Windows Installer service when system services are not loaded, start the service manually. Hither'due south how:

1. In Windows 10, in the search box on the taskbar, type computer management.  (In Windows 8 or viii.one, swipe in from the right edge of the screen, and then select Search. Or, if y'all're using a mouse, bespeak to the lower-correct corner of the screen, then click Search.  Blazon estimator management.)

2. Right-click or swipe down on Calculator Management in the search results, then select Manage.

3. In the console tree, select Services and Applications, and and then select Services.

4. In the details pane, right-click or swipe down on Windows Installer, and then select Offset.

1. Click Start, correct-click Computer, and so select Manage.
   Annotation If you're prompted for an administrator password or for confirmation, type the countersign or provide confirmation.

2. In the console tree, select Services and Applications, and then select Services.

3. In the details pane, right-click Windows Installer, then select Commencement.

wearingtress1990.blogspot.com

Source: https://support.microsoft.com/en-us/topic/how-to-perform-a-clean-boot-in-windows-da2f9573-6eec-00ad-2f8a-a97a1807f3dd

Share this post